C ARE & MAINTENANCE

For best results, it is important to periodically check and care for the filters and spray arms. WARNING : To prevent any possible injury during care and maintenance/cleaning, be sure to wear

gloves and/or protective clothing.

Cleaning metallic parts

With a cloth or sponge, you can clean some parts such as exterior or interior parts.

The stainless steel tub has a tendency to build up cloudy film on its surface, especially when using hard water.

Cleaning Spray Arms

- Lower Spray Arm

Check that the water jet holes are not blocked by food particles.

When cleaning is necessary, remove the spray arm by pulling up.

Clean the spray arm and replace it by pushing down to snap it in place. Be sure spray arm turns freely after installation.

- Upper Spray Arm

Pull the upper rack forward. Make sure the water jet holes are not blocked by food particles.

If cleaning becomes necessary, remove the spray arm by turning the nut on the bottom of the spray arm 1/8th turn counterclockwise and pulling down. (See illustrations below)

Clean the spray arm and replace it in the reverse order. Make sure the nut locks back in place (1/8th turn).

- Top Spray Arm

Make sure the water jet holes are not blocked by food particles.

When cleaning is necessary, remove the arm by disassembling the hook from the bracket which holds the top spray arm assembly to the tub.

Clean the spray arm and replace it.

Seasonal Maintenance and Storage

-During the summer season, if you will be absent for extended periods of time, it is recommended that you close the water valve and unplug power cord, or shut off the circuit breaker.

-During the winter season, if there is a possibility of freezing temperatures, it is recommended that you winterize the water supply lines and the product itself.

CARE & MAINTENANCE

15

Page 15
Image 15
LG Electronics LDF8812ST Are & Maintenance, Cleaning metallic parts, Cleaning Spray Arms, Seasonal Maintenance and Storage