SETTING THE FUNCTIONS
Press the button for the desired function to view and select other settings.
SETTING THE DISPENSER LOCK
Press and hold the ALARM/LOCK button for three seconds to lock the dispenser and all of the other control panel functions. Press and hold again for
3 seconds to unlock.
SETTING THE DOOR ALARM
The ALARM/LOCK button also controls the door alarm that sounds three times in
Press the ALARM/LOCK button once to activate and deactivate the door alarm function.
NOTE: Contact your local service center if the alarm continues to sound after the doors are closed.
RESETTING THE FILTER INDICATOR
Press and hold the LIGHT/FILTER button for more than 3 seconds to reset the filter indicator after the water filter has been replaced.
NOTE: It is recommended that the filter be replaced when the indicator light on the front dispenser reaches 0.
If the water or ice cube taste starts to deteriorates.
ACTIVATING ICE PLUS
Press the ICE PLUS/ENERGY SAVING button once to activate the ICE PLUS function. The ICE PLUS icon on the display panel will illuminate when activated.
The ICE PLUS function runs the freezer compartment at the coldest setting for a
NOTE: Press the button again to deactivate the ICE PLUS function.
ACTIVATING ENERGY SAVING
Press the ICE PLUS/ENERGY SAVING button for at least 3 seconds to activate or deactivate the function.
This function is recommended for added energy savings. (Some heaters to reduce excess moisture on the refrigerator may be turned off)
The energy saving function is also recommended during long periods of time spent away from
DIAGNOSTIC FAILURE DETECTION
The diagnostic function automatically detects problems with your refrigerator, and a diagnostic code will appear in the display. NOTE: If a diagnostic code appears in the display during use, note the code and then call USA
25 
