REFRIGERATOR INSTALLATION
HOW TO REMOVE AND INSTALL THE PULLOUT DRAWER
IMPORTANT: To avoid possible injury or product or property damage, you will need two people to perform the following instructions.
1. Removing Pullout Drawer
•Pull the drawer open to full extension. Remove the lower basket (1) by lifting basket from rail system. (If you tilt the door, it will be easier.)
1
•Press both hangers with your thumbs to lift it up.
•Separate the left and right rail cover
•Remove the screws(2) of the rail on both sides.
2 
•With both hands, hold both sides of the door and pull it up to separate it from the rails.
•With both hands, hold the center bar and push it in to let both rails fitted simultaneously.
wCAUTION: When you remove the drawer, do not hold the handle. If it may come off and it could cause personal injury.
wCAUTION: When laying the drawer down, be careful not to damage the floor or hurt your feet by the sharp edges on hinge side.
13
