LG Electronics LH-CX245 TV & Set Top Box or another VCR Connections, Basic connections AV, Tips

Installation and Setup

TV & Set Top Box (or another VCR Connections)

TV & Set Top Box (or another VCR)

A

D

	R	S
E	SCART INPUT	S-VIDEO
		INPUT
		AERIAL

Rear of TV

Installation and Setup

•Make one of the following connections, depending on the capabilities of your existing equipment.

Tips

•Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD/VCR Combi receiver. Use one of the connections described below.

•Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections.

Caution

•Make sure the DVD/VCR Combi receiver is connect- ed directly to the TV. Select the correct AV input on your TV.

•Do not connect your DVD/VCR Combi receiver to TV via your DVD/VCR Combi receiver. The DVD image could be distorted by the copy protection system.

Basic connections (AV)

1.Connect the EURO AV1 AUDIO/VIDEO on the rear panel of the DVD/VCR Combi receiver to the scart input socket on the TV using a SCART lead (E).

2.You can connect such a Set Top Box (or another VCR) to the DVD/VCR Combi receiver (D).

Basic connections (RF)

1.Connect the aerial cable (A) from your indoor/ out- door aerial to ANT.IN jack on the rear panel of DVD/VCR Combi receiver.

2.Connect the supplied RF cable (R) from the RF. OUT jack on the rear panel of DVD+VCR Receiver to your television’s Aerial Input.

S-Video connection

Connect the S-VIDEO OUT jack on the DVD/VCR Combi receiver to the S-VIDEO IN jack on the TV using the S-Video cable (S).

Notes

•The signal of S-VIDEO OUT jack will output only when the function mode is selected to CD/DVD.

•When you connect the DVD/VCR Combi receiver to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections.

11