LG Electronics LH-CX245 owner manual Progressive Scan ColorStream pro connection

Progressive Scan (ColorStream® pro) connection

Connect the EURO AV1 AUDIO/VIDEO socket on the DVD/VCR Combi receiver to the COMPONENT VIDEO INPUT(Y Pb Pr) jacks on the TV using the SCART to RCA cable (Optional).

If your television is a high-definition or “digital ready” television, you may take advantage of the DVD/VCR Combi receiver progressive scan output for the highest video resolution possible.

If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD/VCR Combi receiver.

Notes:

•Set the Progressive Mode to “On” on the setup menu for progressive signal, see page 24.

•Once the setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to On in error, you must reset the unit.

1)Remove any disc from the unit and close the disc tray. See that “NO DISC” is displayed on the display window.

2)Press STOP and hold it for five seconds before releasing it. The video output will be restored to the standard setting and a picture will once again be visible on a conventional analog TV or monitor.

•Progressive scan does not work with the analog video connections (yellow VIDEO OUT jack).

Rear of TV

S-VIDEO	VIDEO		COMPONENT VIDEO /		SCART INPUT
INPUT	INPUT	PROGRESSIVE SCAN INPUT
		Y	Pb	Pr

Y(G) Pb(B) Pr(R)

Rear of DVD/VCR Combi receiver

Caution:

You must set the TV Output Select option on the setup menu to use Y Pb Pr or RGB signal from the EURO AV1 AUDIO/VIDEO socket.

(See “TV Output Select” on page 24.)

12