LG Electronics LH-CX245 owner manual Speaker System Connection, About Ferrite Core

Speaker System Connection

Connect the speakers using the supplied speaker cords.

To obtain the best possible surround sound, adjust the speaker parameters; distance, level, etc..

Front Speaker		Front Speaker
(Right)	Centre Speaker	(Left)

Rear Speaker	Subwoofer
(Right Surround)

Rear Speaker

(Left Surround)

Notes

•Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –. If the cables are reversed, the sound will be distorted and will lack base.

•If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers.

•Do not remove the front cover of supplied speaker.

About Ferrite Core

Be sure to attach the ferrite core to the speaker cables (for connecting to this unit).

This ferrite core can reduce noises.

How to attach the ferrite core

1.Push the stopper [a] of the ferrite core to open.

2.Wind the Subwoofer cable three times on the ferrite core (A). Wind the Subwoofer cable once on the ferrite core (B).

3.Pass the others straight on the ferrite core (B).

4.Close the ferrite core until it clicks.

Notes

•Take care not to pinch the speaker cables between the ferrite cores.

•Attach the ferrite core near the unit (Refer to the fig.3 and comment.).

1

a a

2
A	B

Make the leagth here as short as possible.

3

A

B

14