Tuning into a Station Manually
1.Press FM/AM on the remote control or on the front panel until the frequency band appears on the display and TV screen.
2.Press FM/AM on the remote control or on the front panel to select the desired band.
3.Press + PRESET - on the front panel or hold down 1 and 2 on the remote control to tune in the desired station.
Tuning into a Station Automatically
Hold down + PRESET - on the front panel or hold down 1 and 2 on the remote control for 1 or 2 seconds, and a station is searched for automatically.
Note
The search may not stop at a station with a very weak signal.
Mute
Press MUTE to mute your unit.
You can mute your unit in order, for example, to answer the telephone, MUTING and MUTE indicator appear in the display.
RDS Operation
This unit is equipped with RDS (Radio Data System), which brings a wide range of information to FM radio. Now in use in many countries, RDS is a system for transmitting station call signs or network information, a description of station programme type text message about the station or specifics of musical selection and the correct time.
RDS Tuning
When a FM station is tuned in and it contains RDS data, the unit will automatically display the station’s call sign and the RDS indicator will light in the Display Window as well as indicators for the RDS services programme (PS) if transmitted by the station.
RDS Display
The RDS system is capable of transmitting a wide variety of information in addition to the initial call sign that appears when a station is first tuned. In normal RDS operation the display will indicate the station name. Pressing RDS on the remote control enables you to show the station name.
Note
If the RDS services programme (PS) is not being transmitted, the Display Window will show a PS NONE message.
Operation
47
