2.2 AIR HANDLING PARTS
2.2.1 ELECTRIC HEATER
(ELECTRIC HEATER MODEL ONLY)
1. Remove the front grille.(Refer to section 2.1.1) |
| |
2. | Remove the control box assembly. |
|
| (Refer to section 2.1.2) |
|
3. | Remove the 4 screws which fasten the Evaporator. | Figure 5 |
| (See Figure 5) |
4. Remove the top cover assembly, net steel, brace. (See Figure 6)
Figure 6
5. Remove the 6 screws which fasten the
6. Pull the
Figure 7
7. Remove the 2 screws which fasten the electric heater in the left hand side.
8. Pull the electric heater towards left for a while and then lift up vertically to disassemble it completely from Air guide.
Figure 8
Copyright ©2008 LG Electronics. Inc. All right reserved. | - 10 - |
Only for training and service purposes | LGE Internal Use Only |
|