3.2.3 UNIT INSTALLATION
1. Remove the shipping screw from the ventilation door. (See Figure 24)
Figure 24
2. Remove the front gille by pulling it out at the bottom to release it, then lift it up along the unit top front.
(See Figure 25)
Figure 25
3. Slide the unit into the wall sleeve and secure with 6 screws through the unit flange holes. (See Figure 26)
Figure 26
4. Reinstall the front grille by hooking the top over the unit top, then pushing it in at the bottom. (See Figure 27)
Figure 27
Copyright ©2008 LG Electronics. Inc. All right reserved. | - 22 - |
Only for training and service purposes | LGE Internal Use Only |
|
