1.3 CONTROL LOCATIONS
•OPERATION
ELECTRIC HEATING MODEL
TEMPERATURE CONTROL
Set the Thermostat control to the desired temperature mark 5 (the
•VENTILATION
The ventilation lever is located to the lower left side of the unit. The ventilation lever must be in the CLOSE position in order to maintain the best cooling conditions.
When fresh air is necessary in the room, set the ventilation lever to the OPEN position.
The damper is opened and outdoor air is drawn into the room. This will reduce the cooling or heating efficiency.
CAUTION
When the air conditioner has performed a cooling or heating operation and is turned off or set to the fan position, wait at least 3 minutes before resetting to the cooling operation.
COOLING ONLY MODEL
OPERATION MODE SELECTOR
OFF | Turns air conditioner off. |
LOW FAN | Low speed fan operation without cooling. |
HIGH FAN | High speed fan operation without cooling. |
LOW COOL | Cooling with the low speed fan operation. |
HIGH COOL | Cooling with the high speed fan operation. |
LOW HEAT | Heating with the low speed fan operation. |
HIGH HEAT | Heating with the high speed fan operation. |
VENT
VENT CLOSE
OPEN
NOTE
A slight heat odor may come from the unit when first switching to HEAT after the cooling season is over.
This odor, caused by fine dust particles on the heater, will disappear quickly. This is harmless.
Copyright ©2008 LG Electronics. Inc. All right reserved. | - 5 - |
Only for training and service purposes | LGE Internal Use Only |
|
