SOUND CONTROL
I/II
Stereo/Dual Reception
When a programme is selected, the sound information for the station appears with the programme number and station name.
1 | Press the I/II button and then D / E button. |
|
|
Broadcast
Mono
Stereo
Dual
On Screen Display
MONO
STEREO
DUAL I, DUAL II, DUAL I+II
A Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of sound is improved. To switch back to stereo.
A Language selection for dual language broadcast
If a programme can be received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL I+II.
DUAL I Sends the primary broadcast language to the loudspeakers.
DUAL II Sends the secondary broadcast language to the loudspeakers.
DUAL I+II Sends a separate language to each loudspeaker.
NICAM Reception
If the set is equipped with a receiver for NICAM reception,high quality NICAM (Near Instantaneous Companding Audio Multiplex)digital sound can be received.
Sound output can be selected according to the type of broadcast received.
1When NICAM MONO is received, you can select NICAM MONO or FM MONO.
2When NICAM stere is received, you can select NICAM STEREO or FM MONO. If the stereo signal is weak,switch to FM MONO.
3When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or NICAM DUAL I+II or FM MONO.
Speaker Sound Output Selection
In AV, Component,
Select the sound output.
L+R: Audio signal from audio L input is sent to the left loudspeaker and audio signal from audio R input is sent to the right loudspeaker.
L+L: Audio signal from audio L input is sent to left and right loudspeakers.
R+R: Audio signal from audio R input is sent to left and right loudspeakers.
44
