16
Select Component.
Connect the AV cable as shown in the below figure, then connect the power cord (see page 10).
Connect the input terminal with the matching color.
BNC Cable
(not included)
HDTV Receiver
Select an input signal.
Press INPUT on the remote control to select the input signal.
Or, press INPUT on the bottom of the set.
Audio Cable
(not included)
Connecting to External Devices
Note:
- Some devices may require HDCP in order to display HD signals.
- Component doesn't support HDCP.
Component Input (480i/480p/576i/576p/720p/1080i)
INPUT → ◄ ► → OK
INPUT → ◄ ► → AUTO/SET
1
2
Input List
AV Component RGB HDMI/DVI SuperSign
Set