20Troubleshooting
6
Troubleshooting
6 Troubleshooting
PROBLEM | CAUSE | CORRECTION | |
|
|
| |
No Power. | The power cord is not plugged in. | Plug in the power cord. | |
|
| ||
|
|
| |
| Check whether electricity failed. | Check the condition by operating other | |
|
| electronic devices. | |
|
|
| |
No sound | Check whether you select right function. | Press FUNCTION and check the selected | |
| function. | ||
|
| ||
|
|
| |
| The audio cables are damaged. | Replace with a new audio cable. | |
|
|
| |
The unit does | An unplayable disc is inserted. | Insert a playable disc. | |
|
| ||
not start |
|
| |
No disc is inserted. | Insert a disc. | ||
playback. | |||
|
| ||
|
|
| |
| The disc is dirty. | Clean the disc. (Refer to the 19 page) | |
|
|
| |
| The disc is inserted upside down. | Place the disc with the label or printed side | |
|
| facing upwards. | |
|
|
| |
Radio stations | The antenna is positioned or connected poorly. | Connect the antenna securely. | |
|
| ||
cannot be tuned |
|
| |
The signal strength of the radio station is too weak. | Tune to the station manually. | ||
in properly. |
|
| |
| No stations have been preset or preset stations | Preset some radio stations, see page 15 for | |
| have been cleared (when tuning by scanning preset | details. | |
| channels). |
| |
|
|
| |
The remote | The remote control is too far from the unit. | Operate the remote control within about 23 ft | |
| (7m). | ||
control does not |
| ||
|
| ||
work properly. | There is an obstacle in the path of the remote con- | Remove the obstacle. | |
| |||
| trol and the unit. |
| |
|
|
| |
| The battery in the remote control is exhausted. | Replace the battery with new one. | |
|
|
|
