Safety
and to account for any variations
inmeasurements.
Tests for SAR are conducted using
standard operating positions
specified by the FCC with the
phone transmitting at its highest
certified power level in all tested
frequency bands. Although SAR is
determined at the highest certified
power level, the actual SAR level of
the phone while operating can be
well below the maximum value.
Because the phone is designed to
operate at multiple power levels to
use only the power required to
reach the network, in general, the
closer you are to a wireless base
station antenna, the lower the
power output.
Before a phone model is available
for sale tothe public, it must be
tested and certified to the FCC
that it does not exceed the limit
established bythe government-
adopted requirement for safe
exposure. The tests are performed
inpositions and locations (e.g., at
the ear and worn on the body) as
required by the FCC for each
model.
This device wastested for typical
body-worn operations with the
back of the phone kept 0.79
inches (2.0 cm) between the user’s
body and the back of the phone.
To comply with FCC RF exposure
requirements, a minimum
separation distance of 0.79 inches
(2.0 cm) must be maintained
between the user s body and the
back of the phone. Third-party
belt-clips, holsters, and similar
accessories containing metallic
componentsshould notbe used.
Body-worn accessories that cannot
maintain 0.79inches(2.0 cm)
separation distance between the
user's body and the back of the
phone, and havenotbeen tested
for typical body-worn operations
maynot comply with FCC RF
exposure limits and should be
avoided.
The FCC has granted an
Equipment Authorization for this
model phone with all reported SAR
levels evaluated as in compliance
with the FCC RF emission
guidelines.
The highest SAR value for this
model phone when tested for use
atthe ear is 0.96W/kg and when
116