APPENDIX
PROGRAMMING THE REMOTE CONTROL
The remote is a
Note that the remote may not control all models of other brands.
Programming a code into a remote mode
1Test your remote control.
2
3
4
To find out whether your remote control can operate the component without programming, turn on the component such as a VCR and press the corresponding mode button (such as a DVD or VCR) on the remote control, while pointing at the component. Test the POWER and PR + / - buttons to see if the component responds properly. If not, the remote requires programming to operate the device.
Turn on the component to be programmed, then press the corresponding mode button (such as a DVD or VCR) on the remote control. The remote control button of desired device is lighted.
Press the MENU and MUTE buttons simultaneously, the remote control is ready to be programmed for the code.
Enter a code number using the number buttons on the remote control. Programming code numbers for the corresponding component can be found on the following pages. Again, if the code is correct, the device will turn off.
5
6
Press the MENU button to store the code.
Test the remote control functions to see if the component responds properly. If not, repeat from step 2.
PROGRAMMING CODE
DVD
Brand | Codes |
| Brand | Codes | Brand | Codes | |||
|
|
|
|
|
|
|
|
|
|
APEX DIGITAL | 022 |
|
| MITSUBISHI | 002 |
| RCA | 005 | 006 |
DENON | 020 | 014 |
| NAD | 023 |
| SAMSUNG | 011 | 015 |
GE | 005 | 006 | ONKYO | 008 | 017 | SONY | 007 |
| |
HARMAN KARDON |
| 027 |
| PANASONIC | 003 | 009 | THOMPSON | 005 | 006 |
JVC | 012 |
|
| PHILIPS | 013 |
| TOSHIBA | 019 | 008 |
LG | 001 | 010 | 016 025 | PIONEER | 004 | 026 | YAMAHA | 009 | 018 |
MAGNAVOX | 013 |
|
| PROCEED | 021 |
| ZENITH | 010 | 016 025 |
MARANTZ | 024 |
|
| PROSCAN | 005 | 006 |
|
|
|
86
