LG Electronics MM22009944DD, MM11999944DD, MM22229944DD owner manual Lsb

APPENDIX

16. Auto Configure (Command: j u)

G To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode.

Transmission

[j][u][ ][Set ID][ ][Data][Cr]

Data 01: To set

Ack

[u][ ][Set ID][ ][OK/NG][Data][x]

17. Equalize (Command: j v)

G To adjust equalize.

Transmission

[j][v][ ][Set ID][					][Data][Cr]
	MSB										LSB
Data :
	0			0	0	0		0	0	0	0
		Frequency							Data
Frequency :			0				120 Hz
			1				200 Hz
			2				500 Hz
			3				1.2 kHz

* Real data mapping 1

00 : Step 0

A : Step 10 (Set ID 10)

F: Step 15 (Set ID 15)

10 : Step 16 (Set ID 16)

64:Step 100 6E : Step 110

73 : Step 115

74 : Step 116

C7: Step 199

FE : Step 254

FF : Step 255

*Real data mapping 2

00 :-40

01 : -39

02 :-38

28 :0

4E : +38

4F : +39

50 : +40

4	3 kHz
5	7.5 kHz

612 kHz

Step (Frequency data):

Refer to ‘Real data mapping 3 ’.See page 96.

Ack

[v][ ][Set ID][ ][OK/NG][Data][x]

* Equalize command expression

7	6	5	4	3	2	1	0	Frequency
0	0	0						120Hz
0	0	1						200Hz
0	1	0						500Hz
0	1	1						1.2KHz
1	0	0						3KHz
1	0	1						7.5KHz
1	1	0						12KHz
					Step			OSD
7	6	5	4	3	2	1	0	Value
			0	0	0	0	0	-24
			..	..	..	..	..	..
			0	1	1	1	1	0
			..	..	..	..	..	..
			1	1	1	1	1	24

Ex) If you wish to set frequency 500Hz and -20 value on menu OSD,refer to ‘Real data mapping 3’ and then find Step value for -20.

010 (500Hz)00011(Step 3)=>01000011 =>43 (Hexadecimal):[j ][v ][ ][Set ID ][ ][43 ][Cr ]

*3 bits of Frequency and 5 bits of Step makes 8 bits (1 byte). Change 8 bits to Hexadecimal code.

95