EXTERNAL EQUIPMENT SETUP
VCR SETUP
■To avoid picture noise (interference), leave an adequate distance between the VCR and set.
■Typically a still picture is shown on the VCR. If a user uses 4:3 picture format for a long time, an afterimage may remain on the sides of the screen.
When connecting with an antenna
ANTENNA IN | 1 |
ANT OUT | L | R |
ANT IN | OUTPUT | |
SWITCH | ||
|
Wall Jack
2
Antenna
1Connect the RF out socket of the VCR to the aerial socket of the set.
2Connect the aerial cable to the RF aerial in socket of the VCR.
3Store the VCR channel on a desired programme number using the ‘Manual programme tuning’ section.
4Select the programme number where the VCR channel is stored.
5 Press the PLAY button on the VCR.
13
