APPENDIX
09. Tint (Command: k j)
G To adjust the screen tint.
You can also adjust tint in the PICTURE menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data Red : 00 ~ Green : 64
* Refer to ‘Real data mapping 1’. See page 95.
Ack
[j][ ][Set ID][ ][OK/NG][Data][x]
10. Sharpness (Command: k k)
G To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 95.
Ack
[k][ ][Set ID][ ][OK/NG][Data][x]
11. OSD Select (Command: k l)
G To select OSD (On Screen Display) on/off when controlling remotely.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 00 : OSD off | 01 : OSD on |
Ack
[l][ ][Set ID][ ][OK/NG][Data][x]
12 . Remote control lock mode (Command: k m)
GTo lock the front panel controls on the monitor and remote control.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 00 : Lock off | 01 : Lock on |
Ack
[m][ ][Set ID][ ][OK/NG][Data][x]
*If you are not using the remote control, use this mode. When main power is on/off, external control lock is released.
13. Balance (Command: k t)
G To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 95.
Ack
[t][ ][Set ID][ ][OK/NG][Data][x]
14. Colour Temperature (Command: k u)
G To adjust colour temperature. You can also adjust Colour Temperature in the PICTURE menu.
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 00: Medium 01: Cool | 02: Warm |
Ack
[u][ ][Set ID][ ][OK/NG][Data][x]
15. Abnormal State (Command: k z)
G To recognize an abnormal state.
Transmission
[k][z][ ][Set ID][ ][FF][ ][Cr]
Data FF : Read
Ack
[z][ ][Set ID][ ][OK/NG][Data][x]
Data 00: Normal (Power on and signal exist) 01: No signal (Power on)
02:Turn the monitor off by remote control
03:Turn the monitor off by sleep time function
04:Turn the monitor off by
05:5V down
06:AC down
07:Turn the monitor off by Fan Alarm function
08:Turn the monitor off by Off time function
09:Turn the monitor off by Auto sleep function a: Turn the monitor off by AV Board detect
* This function is “read only”.
94
