LG Electronics MMBB0332901 Getting Started with Your Phone, The Battery, Charging the Battery

Getting Started with Your Phone

The Battery

NOTE It is important to fully charge the

battery before initial use of the phone.

The phone comes with a rechargeable battery. Keep the battery charged while not in use in order to maximize talk and standby time. The battery charge level is shown at the top of the LCD screen.

Installing the Battery

To install the battery, insert the edge opposite of the battery contacts into the opening on the back of the phone. Push the battery down until it clicks into place.

Removing the Battery

Turn power off. Slide the battery release latch away from the edge of the battery, then lift the edge of the battery to remove it.

Charging the Battery

Your enV® TOUCH device comes with a cableless wall adapter and a USB data cable which connect together to charge your phone. To charge your phone:

NOTICE

Please use only an approved charging accessory to charge your LG phone. Improper handling of the charging port, as well as the use of an incompatible charger, may cause damage to your phone and void the warranty.

1.Connect the USB data cable into the cableless wall adapter. When connecting as shown below, the LG logo on the USB cable should face toward you.

Cableless Wall Adapter

2.Gently uncover the accessory charging port, then plug the USB data cable (as shown below) into the phone’s charger port and the other end into an electrical outlet.

NOTICE

Please make sure that the 'B' side faces up before inserting a charger or data cable into the charger port of your phone.

3.The charge time varies depending upon the battery level.

25