Settings
Installation Adjustment Menu
The installation adjustment menu is used to make adjustments to bearing alignment, range offset, antenna height and open array park angle.
When the installation adjustment menu is accessed, press the keypad up/down to select a feature. Press the keypad left/ right to make adjustments to a selected feature.
Press Exit to return to the Radar | Installation menu. To | Adjustment Menu |
remove the Radar Installation menu | from the screen, select |
Close and press enter.
Bearing alignment
Used to align the bow of your vessel with the heading line (zero point). Bearing alignment is also referred to as zero bearing.
To make adjustments to bearing alignment, switch the radar state to Transmit and set radar orientation to Heading Up.
To select Heading up orientation:
1.From the Radar Page, press MENU.
2.Select Orientation and press ENTER.
3.Use the keypad to select Heading Up and press ENTER.
4.Press EXIT.
Before Bearing Alignment | After Bearing Alignment |
Bow of ship is lined up with | Bearing line aligned with |
the tip of a peninsula; the | peninsula, matching the |
bearing line is not. | alignment of the bow. |
59
