Pages
Move or Placing a Gauge
The Move gauge command allows you to move data overlay to any position on the screen. When you use the Place gauge command, the gauge will be locked in its current position.
To move/place a gauge:
1.Press the Enter key when the gauge is in edit mode. Four directional arrows will appear.
2.Use the keypad to move the gauge into the desired location.
3.Press Enter to place the gauge.
Select Data
Used to select data that will be shown on the data overlay display. When selecting data you first will open a main data category and then choose data to be displayed from the a data subcategory.
Select data menu | Time subcategory |
Type |
|
Switches data overlay display between analog, digital and bar gauge formats, provided the format is appropriate for the selected data type.
To change the gauge type:
1.With the gauge in edit mode, press Menu.
2.Select Configure and press Enter.
3.Select Type and press Enter.
11
