Settings
Diagnostics screen: NMEA 2000 | Diagnostics screen: UDB |
Diagnostics
Displays diagnostic information on NMEA 2000 networks displays the status of information shared between units (UDB). From the UDB tab, you also can select a unit to be used as the master (primary) unit when sharing information. To access the Diagnostics screen, select Diagnostics from the Network menu and press enter.
NMEA 2000 receive/send waypoint
Turns on/off the unit’s ability to send and receive waypoints across a NMEA 2000 network. NMEA 0183 receive waypoint controls the unit’s ability to receive way- points over a NMEA 0183 network.
To turn on/off NMEA send/receive waypoint commands, highlight the desired NMEA send/receive option and press enter.
NOTE: To send waypoints, your must have access to GPS through an
NMEA 2000 network.
When your unit has access to GPS, waypoints will be automatically received/sent when the feature is turned on.
To view waypoints:
1.Access Utilities from the Pages menu.
2.Select Waypoints and press Enter.
Serial Ports
Configures communication ports to send or receive data with another electronic device, like an autopilot.
74
