Pages
Configuration menu
Allows you to Add/Remove sources and adjust Bezel, Caption and Invert Text Settings. Other configuration menu options are covered previously in the section.
To access the Configuration menu, highlight Configuration on the Edit Overlay menu and press enter.
| Configuration Settings | |
Bezel | Adds a bezel to the data overlay gauge, making it easier to | |
see against certain backgrounds | ||
| ||
Caption | Allows you to add/remove data label from gauge | |
Invert Text | Changes appearance of data overlay text |
Add Source
Displays the same type of data from different sources on the same analog gauge.
If, for example, you have multiple engines, you could select port engine RPM as your data type and then display starboard engine RPM using the Add source command.
Both data sources could be displayed simultaneously on an analog gauge with two needles; one dedicated to each source.
To add a source:
1.Select Add source from the Edit Overlay menu and press Enter.
2.Highlight a category and press Enter. A list of subcategories will appear.
3.Select the desired subcategory and press
Enter.
To remove add source data:
1.Highlight Remove source on the Edit overlay menu and press Enter.
2.Select the source you want to remove and press
Enter.
Add Source menu
Showing RPM from
two engines.
13
