LG Electronics MMBB0379501 manual Safety, using standard operating, tested frequency bands, output

Safety

	Tests for SAR are conducted
	using standard operating
	positions specified by the FCC
	with the phone transmitting at its
	highest certified power level in all
	tested frequency bands.
	Although SAR is determined at
	the highest certified power level,
	the actual SAR level of the phone
	while operating can be well below
	the maximum value. Because the
	phone is designed to operate at
	multiple power levels to use only
	the power required to reach the
	network, in general, the closer
S a	you are to a wireless base station
f e	antenna, the lower the power
ty
	output.
	Before a phone model is available
	for sale to the public, it must be
	tested and certified to the FCC
	that it does not exceed the limit
	established by the government-
	adopted requirement for safe
	exposure. The tests are

performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model.

This device was tested for typical body-worn operations with the back of the phone kept 0.79 inches (2.0 cm) between the user’s body and the back of the phone. To comply with FCC RF exposure requirements, a minimum separation distance of

0.79inches (2.0 cm) must be maintained between the user s body and the back of the phone. Third-party belt-clips, holsters, and similar accessories containing metallic components should not be used. Body-worn accessories that cannot maintain

0.79inches (2.0 cm) separation distance between the user's body and the back of the phone, and have not been tested for typical body-worn operations

166