Owner’s Manual 23
Operation
Split ZoomSplit Zoom- Enlarges the picture in correct proportions.
- Split Zoom can be used for all input sources.
- In 2-Split Zoom mode, you can only move the image up or down.
- If an image is enlarged, a section can be viewed without using Split Zoom.
- Split Zoom is not available if OSDrotate is rotate.
1. Press the SPLIT ZOOMbutton repeatedly to select either 2, 4, or 9 Split Zoom.
2. Press the number button corresponding to the section you wish to enlarge. you can move the enlarged screen
with using the D / E / F / Gbutton.
SCREEN
Prev.
Auto config.
ARC
Zoom in/out
Position
Manual config.
Screen adj.
Reset
VGAMode G
640x480
848x480
852x480
SCREEN
MENU
SCREEN
Prev.
Auto config.
ARC
Zoom in/out
Position
Manual config.
Screen adj.
Reset
YNR G
On
Off
SCREEN
MENU
Selecting WSelecting Wide VGAide VGA mode (RGB-PC, DVI-PC mode only)mode (RGB-PC, DVI-PC mode only)- To see a normal picture, match the resolution of RGB mode and selection of VGAmode.
1. Press the MENUbutton and then use D /Ebutton to select the SCREENmenu.
2. Press the Gbutton and then use D /Ebutton to select VGA Mode.
3. Press the Gbutton and then use D /Ebutton to select the desired VGA resolution.
4. Press the ENTERbutton to save.
1
4
2-Split zoom
12
54
4-Split zoom
123
456
789
9-Split zoom
Example of choosing 5. Section 5 is enlarged to fill
the screen.
123
456
789
9-Split zoom
- Use YNR to reduce the picture noise that may appear on the screen.
Luminance Noise Reduction (VLuminance Noise Reduction (Video, S-video and Component 480i modes only)ideo, S-video and Component 480i modes only)1. Press the MENUbutton and then use D /Ebutton to select the SCREENmenu.
2. Press the Gbutton and then use D / Ebutton to select YNR.
3. Press the Gbutton and then use D / Ebutton to select On or Off.
4. Press the ENTERbutton to save.