Plug your oven into a standard household socket. Make sure your oven is the only appliance connected to the
socket. If your oven does not operate properly, unplug it from the electrical socket and then plug it back in.
Open your oven door by pulling the DOOR HANDLE. Place the METAL TRAY inside the oven.
Fill a microwave safe container with 300 ml (1/2 pint) of water. Place on the METAL TRAY and close the oven door. If you have any doubts about what type of container to
use please refer to page 28.
Press the STOP/CLEAR button, and press the START button one time to set 30
seconds of cooking time.
The DISPLAY will count down from 30 seconds. When it reaches 0 it will sound BEEPS. Open the oven door and test the temperature of the water. If your oven is operating the water
should be warm. Be careful when removing the container it may be hot.
YOUR OVEN IS NOW INSTALLED
The contents of feeding bottles and baby food jars shall be stirred or shaken and the temperature checked
before consumption, in order to avoid burns.
5
