UNPACKING & INSTALLING
By following the basic steps on these two pages you will be able to quickly check that your oven is operating correctly. Please pay particular attention to the guidance on where to install your oven. When unpacking your oven make sure you remove all accessories and packing.
Check to make sure that your oven has not been damaged during delivery.
Unpack your oven and place it on a flat level surface.
GLASS TRAY
ROTATING RING
Place your oven on a flat, level surface but make sure there is at least 10 cm of space on the top, rear and sides so there is air flow for ventilation. Exhaust outlets are located in the back and
side of your oven. Blocking the outlets can damage your oven. THIS OVEN IS DESIGNED FOR AN INDIVIDUAUL BUILT IN APPLICATION. IT SHOULD NOT BE PART OF A WALL OVEN ENCLOSURE WITHOUT SEPERATION.
THIS OVEN SHOULD NOT BE USED FOR COMMERCIAL
CATERING PURPOSES
4
