UNPACKING & INSTALLING
Plug your oven into a standard household socket. Make sure your oven is the only appliance connected to the socket. If your oven does not operate properly, unplug it from the
electrical socket and then plug it back in.
Open your oven door by pressing the DOOR OPEN button. Place the ROTATING RING inside the oven and
place the GLASS TRAY on top.
Fill a microwave safe container with 300 ml (1/2 pint) of water. Place on the GLASS TRAY and close the oven door. If you have any doubts about what type of container to use please
refer to page 16.
automatically.
Enter the time by touching [3] and [0].
And touch START.
30
SECONDS
The DISPLAY will count down from 30 seconds. When it reaches 0 it will sound three BEEPS. Open the oven door and test the temperature of the water. If your oven is operating the water
should be HOT. Be careful when removing the container it may be hot.
YOUR OVEN IS NOW INSTALLED
5
