14
ENG
English
UsInG THE MonIToR sET
DVI connection - PCoIPTransfers video signals to another monitor. Con-
nect the monitor using the DVI cable as illustrated
below.
It is used for the expansion or replication of PCoIP
mode screen.
yTo connect the monitor to a computer, use
the appropriate signal cable (LAN and D-
SUB).
yA converter can be used to convert the DVI-I
input signal to D-SUB input signal.
yWhen connecting the power cord to the out-
let, use a grounded (3-hole) multi-socket or a
grounded wall outlet.
yThe monitor may flicker when turned on in an
area of low temperature. This is normal.
ySometimes red, green or blue spots may ap-
pear on the screen. This is normal.
yConnect the input signal
cable and tighten in the
direction of the arrow. To
prevent disconnection
secure the cable tightly.
yDo not press on the screen for a prolonged
time. This may cause image distortion.
yDo not display a still image on the screen
for a prolonged time. This may cause image
retention. If possible, use the screen saver.
DVI-I(D) IN
MONITOR
CaUTIon
noTE