22
ENG
English
CUsToMIZInG sETTInGs
Menu analog
(D-sUb)
PCoIP Description
lanGUaGE ● ● Sets the menu screen to the desired language.
PCoIP
● ●
Allows the PCoIP to be turned ON or OFF.
If PCoIP is ON
If you switch to D-SUB input, PCoIP continues to be turned on.
If PCoIP is OFF
If you switch to D-SUB input, PCoIP will be turned off.
oRIGInal RaTIo
●x
WIDE
Switch to full screen mode according to input image signal.
oRIGInal
Change the input image signal ratio to original.
* This function works only if input resolution is lower than Monitor
set ratio (16:9).
WHITE balanCE
●x
If the video card output is different from the specified level, the color
may appear to have altered due to the video signal distortion. The
white balance adjusts the output signal level to correspond to that of
the standard signal, thus providing optimal display. Run this option
when the screen displays an image with both white and black.
faCToRY REsET ● ● Resets the screen to the factory default settings. Note that the
language option will not be reset.
yanalog: D-sUb (analog signal) input. PCoIP: Internal signal through the lan.
others
1 Press any button on the front of the monitor to dis-
play the MonIToR sETUP OSD menu.
2 Press the MEnU button to display the options in the
OSD menu.
3 Set the options by pressing the buttons on the front
of the monitor.
4 Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow ( ) button.
Each option is explained below.
yThe factory default is set to OFF.
yIf you use it for the normal PC usage only,
turn off the PCoIP mode to save energy
consumption.
noTE