6
ENG
English
assEMblInG anD PREPaRInG
setting Up the Monitor set

attaching the stand base

1 Place the monitor's screen face down.
yTo protect the screen from scratches, cover
the surface with a soft cloth.
3 Using a coin, turn the screw clockwise to se-
cure the stand base.
2 Check the position (at the front and rear) of
the stand body, then mount the stand base on
the stand body as shown in the figure.
CaUTIon
stand body
stand base
stand base
lifting and moving the Monitor
Please heed the following information when
moving the monitor.
yAvoid touching the screen at all times, as this
may result in damage to the screen or pixels .
CaUTIon
yIt is recommended to move the Monitor in
the box or packing material that the Monitor
originally came in.
yBefore moving or lifting the Monitor,
disconnect the power cord and all cables.
yHold the top and bottom of the Monitor frame
firmly. Make sure not to hold the transparent
part area.
yWhen holding the Monitor, the screen should
face away from you to prevent the screen
from scratches.
yWhen transporting the Monitor, do not
expose the Monitor to jolts or excessive
vibration.
yWhen transporting the Monitor, keep the
Monitor upright, never turn the Monitor on its
side, or tilt towards the left or right.