21
ENG
English
CUsToMIZInG sETTInGs
Menu analog
(D-sUb)
PCoIP Description
HoRIZonTal ●xMoves the display area left or right.
VERTICal ●xMoves the display area up or down.
CloCK ●xIf vertical lines are shown on the screen, adjust the frequency to mini-
mize the lines and adjust the screen's horizontal width.
PHasE
●x
Adjusts the focus of the screen's image.
Use when frequencies are shown on the screen or when the text ap-
pears overlapped. For optimal results, use this option after adjusting
the "CloCK" option.
yanalog: D-sUb (analog signal) input. PCoIP: Internal signal through the lan.
Display
1 Press any button on the front of the monitor to dis-
play the MonIToR sETUP OSD menu.
2 Press the MEnU button to display the options in the
OSD menu.
3 Set the options by pressing the buttons on the front
of the monitor.
4 Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow ( ) button.
Each option is explained below.
Volume (only supported in PCoIP)
1 Press any button on the front of the monitor to dis-
play the MonIToR sETUP OSD menu.
2 Press the MEnU button to display the options in the
OSD menu.
3 Set the options by pressing the buttons on the front
of the monitor.
4 Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow ( ) button.