4. LG Network Storage Web Menu Use (for LG Network Storage administrators)
55
② To use it check ‘Enable’ if ‘Disable’ is not used. If ‘Enable’ is checked, proceed
with the following steps:
③ SMTP Server Address: Input the Mail Server address. Refer to the information
page in the network administrator Mail Service, and input the accurate SMTP
Server Address value. (e.g. smtp.mail.yahoo.com) In the case that the port
number used for the mail server is not the default value, the port number should
be recorded next to the server address. This would generally be the case when
the SMTP SSL has been designated. (e.g. smtp.gmail.com:446)
④ SMTP Authentication: When sending mail, dependant on the mail server, login
may be required. In the case of own mail server, the SMTP Authentication must
be activated. (e.g. Smtp.Webmail SMTP servers such as yahoo.com perform
certification processes. Refer to the user webmail service help)
⑤ SMTP SSL Support: Some mail servers’ login information is encrypted and sent.
At this time the SMTP SSL Support must be activated. (e.g. Smtp.Webmail smtp
servers such as gmail.com perform certification processes. Refer to the user
webmail service help)
⑥ Subject: The information email subject can be specified or changed.
⑦ Recipient Mail Address: Input the mail receipt administrator’s address.
⑧ Notification Trigger: Set up the information concerning the periodic use of the
HDD. In the case of not wanting to receive message periodically, the option may
be disabled.
⑨ HDD Status sending time: The HDD use information mail out frequency can be
determined (daily/weekly/monthly).