LG Electronics P925G manual Wireless connection with Bluetooth, Touch OK to exit

password and click "Next". The default password is "0000". You can change the password in Settings > Wireless & Networks > On-Screen Phone Settings.

4Click "OK" to exit the window.

NOTE: Go to Settings > SD card & phone storage settings and make sure that the “Mass storage only” checkbox is deselected.

Wireless connection with Bluetooth:

1On your mobile phone, go to Settings > Wireless & Networks > Bluetooth settings. Select Turn on Bluetooth and then select Discoverable.

2If you have previously connected using a cable, run the New Connection Wizard to create a new connection.

3Run the Connection Wizard on the computer, select "Bluetooth connection", then "Next".

4The wizard will start searching for Bluetooth-enabled mobile phones. When the mobile phone you want to connect to appears, click "Stop" to stop searching.

5Select "LG P925g" from the device list and click "Next". You can rename the device if you wish.

6Enter the PIN code (e.g. "0000") and click "Next".

7On your mobile phone, accept the request and enter the same PIN code, then touch "OK".

8Enter the On-Screen Phone password and click "Next". (The default password is "0000").

9Touch "OK" to exit.

To check the phone-to- PC connection

Once the devices have been connected, drag down the notification bar at the top of the home screen to check the On-Screen Phone connection status.

85