Installation
How to connect
Connect the audio and video cables from the external
equipment's output jacks to the TV input jacks, as shown in
the figure.
When connecting the TVto external equipment, match the
jack colors (Video = yellow, Audio Left = white, and Audio
Right = red).
How to use
1. Select the input source by using the TVNIDEO button on
the remote control. (If connected to A/V INPUT 1, select
Video 1 input source).
2. Operate the corresponding external equipment. Referto
external equipment operating guide.
Z]._ Camcorder
Video Game Set
How to connect
1. Connect the DVD video outputs (Y, PB, PR)to the COMPONENT
(Y, PB,PR) INPUT jacks onthe TV and connect the DVD audio
outputs to the AUDIO INPUT jacks on the TV, as shown in the fig-
ure.
2. Ifyour DVD only has an S-Video output jack, connect this to the
S-VIDEO input on the TVand connect the DVD audio outputs to
the AUDIO INPUT jacks on the TV, as shown in the figure.
NOTE: If your DVD player does not have component video output,
use S-Video.
How to use
1.Turn on the DVD player, insert a DVD.
2. Use the TVNIDEO orMULTIMEDIA button on the remote control
to select Component 1or Component 2. (If connected to S-
VIDEO, select theVideo 1 orVideo 2 external input source.)
3. Refer to the DVD player's manual for operating instructions.
Component Input ports
To get better picture quality, connect a DVD player to the compo-
nent input ports as shown below.
Component ports
on the TV imiiiiii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iiii
Video output ports
on DVD player
or
DVD
14 Plasma TV