Operation
How to connect
1.To get the best picture quality, adjust the PC
graphics card to (RU-42PZ61->1024x768, RU-
42PZ71->852x480, RU-50/60PZ61-> 1366x768),
60Hz.
2. Use the TV's RGB INPUT or DVI (Digital Visual
Interface) INPUT port for video connections,
depending on your PCconnector.
• Ifthe graphic card on the PC does notoutput
analog and digital RGB simultaneously, connect
only one ofeither RGB INPUT or DVI INPUT to
display the PC on the TV.
• Ifthe graphic card on the PC does output analog
and digital RGB simultaneously, set the TV to
either RGBor DVI; (the other mode is set to Plug
and Play automatically bythe TV.)
3.Then, make the corresponding audio connection. If
using a sound card, adjust the PC sound as
required.
How to use
1.Turn on the PCand the TV.
2. Turn on the display by pressing the POWER button on the TV's remote control.
3. Use TV/VIDEO or MULTIMEDIA on the remote control toselect RGB, or DVl source.
4. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC
mode. If noise is present, change the PC mode to another resolution, change the refresh rate toanother rate or adjust the
brightness and contrast on the menu until the picture is clear. If the refresh rate of the PCgraphic card can not be changed,
change the PC graphic card or consult the manufacturer of the PC graphic card.
NOTES: • Use aDVI cable.
•Avoid keeping a fixed image on the TV's screen for a long period of time. The fixed image may become permanently
imprinted on the screen. Use the Orbiter screen saver when possible.
•The synchronization input form for Horizontal and Vertical frequencies is separate.
16 Plasma TV