ExternalControlDeviceSetup

01. Power (Command2:a)

G Tocontrol PowerOn/Off of theTV.

Transmission
[[k][a][ ][Set ID][ ][Data][Cr] J
Data 0 • Power Off 1
Acknowledgement
[[a][ ][Set ID][ ][OK][Data][x] J
• Power On
* In a like manner, if other functions transmit 'FF' data
based on this format, Acknowledgement data feedback
presents status about each function.

02. Input Select (Command2:b) (Main Picture Input)

G To select input source for the TV.
You can also select an input source using the TV/VIDEO
button on the TV's remote control.
Transmission
[[k][b][ ][Set ID][ ][Data][Cr]
Data 0 :TV
1 :Video 1
2 :Video 2
3 :Component 1
Acknowledgement
[[b][ ][Set IU][ ][OK][Data][x]
J
4 • Component 2
5 •RGB
6 •DVI

03. Aspect Ratio (Command2:c) (Main picture format)

G Toadjust the screen format.
You can also adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or inthe
Screen menu.
Transmission
[[k][c][ ][Set ID][ ][Data][Cr] J
Data 0 : Normal screen (4:3)
1 : Wide screen (16:9)
2 : Horizon
3 : Zoom
Acknowledgement
[[c][ ][Set ID][ ][OK][Data][x] J
04. Screen Mute (Command2:d)
G To select screen mute on/off•
Transmission
[[k][d][ ][Set ID][ ][Data][Cr] ]
Data 0 : Screen mute off (Picture on)
1 : Screen mute on (Picture off)
Acknowledgement
[[d][ ][Set ID][ ][OK][Data][x] ]
38 Plasma TV

05. Volume Mute (Command2:e)

G To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission
[[k][e][ ][Set ID][ ][Data][Cr] J
Data 0 • Volume mute on (Volume off)
1 • Volume mute off (Volume on)
Acknowledgement
[[e][ ][Set ID][ ][OK][Data][x] ]
06. Volume Control (Command2:f)
GToadjust volume.
You can also adjust volume with the volume buttons
on remote control•
Transmission
[[k][f][ ][Set ID][ ][Data][Cr] J
Data Min:0~Max:64
• Refer to 'Real data mapping 1' as shown below•
Acknowledgement
[[f][ ][Set ID][ ][OK][Data][x] J
07. Contrast (Command2:g)
GToadjust screen contrast.
You can also adjust contrast in the Picture menu•
Transmission
[[k][g][ ][Set ID][ ][Data][Cr] ]
Data Min:0~Max:64
• Refer to 'Real data mapping 1' as shown below•
Acknowledgement
[[g][ ][Set ID][ ][OK][Data][x] ]
08. Brightness (Command2:h)
G To adjust screen brightness•
You can also adjust brightness in the Picture menu.
Transmission
[[k][h][ ][Set ID][ ][Data][Cr] ]
Data Min:0~Max:64
• Refer to 'Real data mapping 1' as shown below•
Acknowledgement
[[h][ ][Set ID][ ][OK][Data][x] J
• Real data mapping 1
0 Step 0
A Step 10 (SET ID 10)
F Step 15 (SET ID 15)
10 Step 16 (SET ID 16)
63 Step 99 (SET ID 99)
64 Step 100