| Connecting | 27 | ||
|
|
|
| |
Wired Network Setup | 3. Select [OK] and press ENTER (b) to apply |
| ||
If there is a DHCP server on the local area network | network settings. |
| ||
4. The player will ask you to test the network |
| |||
(LAN) via wired connection, this player will |
| |||
connection. Select [OK] and press ENTER (b) to | ||||
automatically be allocated an IP address. After | ||||
complete the network connection. |
| |||
making the physical connection, a small number of |
| |||
5. If you select [Test] and press ENTER (b) at |
| |||
home networks may require the player’s network |
| |||
setting to be adjusted. Adjust the [NETWORK] | step 5 above, the network connection status is | |||
setting as follow. | displayed on the screen. |
| ||
Preparation | You can also test it on the [Connection Status] | |||
in the [Setup] menu. | 2 | |||
Before setting the wired network, you need to |
|
| Connecting | |
connect the broadband internet to your home |
|
| ||
|
|
| ||
network.
1. Select [Connection Setting] option in the [Setup] menu then press ENTER (b).
2.Use W/S/A/Dto select the IP mode between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP address automatically.
,,Note
If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using W/S/ A/Dand numerical buttons. If you make a mistake while entering a number, press CLEAR to clear the highlighted part.
