16 17
Turning the Phone On and Off
Turning the Phone On
1.Install a charged battery pack or connect the
phone to an external power source such as the
cigarette lighter adapter or car kit.
2.Press for a few seconds until the red light at
the top of the phone flashes.
If you want to make a call, fully extend the
antenna for optimum performance.
As with any other radio device, avoid any
unnecessary contact with the antenna while
your phone is on.
Turning the Phone Off
1.Press and hold until “Good Bye~” text is
displayed on the LCD, and then release the button.
2.Protect the antenna by pushing it back into the
phone, if extended.
Making a Call
Whenever you make a call, follow these simple steps:
1.Make sure the phone is turned on.
If not, press .
2.
Enter the phone number with area code, if needed.
3.Press .
If the phone is locked, enter the lock code and
press .
“Call Failed” indicates that the call did not go through.
4. Press to disconnect the call.
5.“This phone has been restricted” displayed on
your screen means that outgoing call restricted
mode is turned on.
If you want to turn off this function, follow the
steps below.
[MENU] [7] Security Lock code insert
[2] Restrict “No” [OK]
Correcting Dialing Mistakes
If you have misdialed a number, press Soft Key 2
CLR once to erase the last entered digit or hold
down Soft Key 2 CLR for at least one second to
delete all digits.
Receiving Calls
1.When the phone rings, open the flip cover or
in case the flip cover is closed, press any key
(except ) to answer.
If you press the button once when you
receive a call, you can hold on the present
call, and bell sound or vibration stops. If you
press the button twice, the present call is
terminated.
2.Press to disconnect the call.
Chapter 2. Basic Functions