When you leave a service area, the phone displays “Leaving Service Area” message.
4. Call Connect (MENU 
)
Alert sound to notify the user when the call is connected.
Display (MENU 
)
Backlight (MENU 
)
Choose the settings of the LCD and keypad backlight. “10 seconds” turns the backlight off 10 seconds after the last key was pressed. “30 seconds” waits 30 seconds after the last key was pressed. “On when Flip open” means that the backlight is always on while flip is open. “Always on” means that the backlight is on regardless of the flip’s status. Choosing “Always on” significantly decrease battery drain. “Always off” means that the backlight is never on.
Banner (MENU 
)
Enter the banner (up to 16 characters) that is displayed on the top line when the phone powers up and when it is in standby mode. Press Soft Key 1 OPT and press Soft Key 1 SEL select [Edit] using the [ 
] button, to make changes to the existing banner. Enter the characters as you would when storing a name tag to a memory location. Then press Soft Key 1 SAVE .
Theme (MENU 
)
You can set up the screen displayed on the LCD screen in the standby mode.
3 4
Auto Hyphen (MENU 
)
Set hyphen option. When on, this automatically inserts hyphens to be consistent with U.S. phone numbers.
Language (MENU 
)
Set the
System (MENU 
)
Version (MENU 
)
View the software and PRL version.
Call Information (MENU 
)
Last Call (MENU 
)
Displays duration of last call in minutes and seconds.
Home Calls (MENU 
)
Displays the total number and time (minutes and seconds) of all calls made while in the home system
(i.e. not roaming), since last reset. You can reset it by pressing Soft Key 1 OPT and Press Soft Key 1 SEL after select [Zero] using the [ 
] button.
Roam Calls (MENU 
)
Displays the total number and time (minutes and seconds) of all calls made while in the roaming mode.
3 5
