Cloning Procedures (Cont.)

Learning / Teaching a Master STB1000 Setup using an LT2002 Clone Programmer (Cont.)

Learn Setup from Master STB1000

1.Ensure the Master STB is set up completely and the EBL is in Pass- through Mode.

2.If an analog channel is not available, direct tune the Master STB1000 to an Aux source, or select an Aux source, such as AV-1, from the Input Menu. Then, plug one end of the MPI cable into the MPI port on the STB jack panel.

3.If there is a good connection after the LT2002 is connected to the STB MPI port, “THE CLONE HAS CONTROL OF THE TV” message will appear on the display panel screen. Press any key on the Installer Remote to access the LT2002 Clone Selection Menu.

4.Press 1 on the Installer Remote to select LEARN FROM TV from the Clone Selection Menu; then press ENTER to proceed to the Memory Bank Selection Menu.

5.Press 1, 2, or 3 on the Installer Remote to select the clone Memory Bank in which to store the Master Setup. Then, press ENTER.

Note: If you choose a Memory Bank that already has a Master device’s setup programmed into it, that setup will be overwritten by the new Mas- ter STB Setup.

6.Verify the Learning setup information on the next screen, and then press POWER to transfer the Master STB Setup into the selected Memory Bank on the LT2002.

Learning usually takes about 90 seconds. “LEARNING IN PROG- RESS” will be displayed on the screen while the LT2002 copies the Master Setup. When the Learning process is complete, a “LEARNING COMPLETE” message will be displayed.

7.When Learning is complete, disconnect the MPI cable from the Master STB1000.

(Optional) Set the Clock

Set the time on a Master STB’s clock. (If the time has already been copied from a TV into the LT2002 clone programmer, you can set the Master STB’s clock by copying the time from the clone programmer.) The LT2002 can copy the current time to both a Master STB and to the clone’s internal clock—accurate to within one minute. (Another reason the LT2002 should be equipped with fresh, high-quality alkaline batteries, is for it to keep the time as accurately as possible.)

Since the LT2002’s time cannot be set directly, the current time needs to be copied from an LG STB equipped with an enabled MPI port.

After the time is copied to the LT2002 clone programmer, the current time will be maintained and can then be transferred to another STB. (This can be a Master STB or another STB which has already had the features set up.)

THE CLONE HAS CONTROL OF THE TV

THE CLONE IS VERSION XX

THE TV IS VERSION

XX

THE SW IS REVISION

XX

CLONE CLOCK = XX:XX

 

TV

CLOCK = XX:XX

 

-PRESS ANY KEY TO CONTINUE.

-DISCONNECT CLONE WHEN DONE.

CLONE SELECTION MENU

(1) LEARN FROM TV

(2)TEACH TO TV

(3)SET CLONE CLOCK FROM TV

(4)SET TV CLOCK FROM CLONE

(5)DISPLAY TV SETUP

(6)DISPLAY CLONE SETUP

-TO CHANGE MENU ITEMS, PRESS CHANNEL KEYS OR DIGITS.

-TO EXECUTE ITEM, PRESS ON/OFF, POWER, OR ENTER.

SAVE TV SETUP IN SELECTED

CLONE MEMORY

(1)MEMORY 1 VER XX REV XX

(2)MEMORY 2 VER XX REV XX

(3)MEMORY 3 VER XX REV XX

(4)RETURN TO CLONE MENU

-TO CHANGE MENU ITEMS, PRESS CHANNEL KEYS OR DIGITS.

-TO EXECUTE ITEM, PRESS ON/OFF, POWER, OR ENTER.

CLONE SELECTION MENU

(1)LEARN FROM TV

(2)TEACH TO TV

(3) SET CLONE CLOCK FROM TV

(4) SET TV CLOCK FROM CLONE

(5)DISPLAY TV SETUP

(6)DISPLAY CLONE SETUP

-TO CHANGE MENU ITEMS, PRESS CHANNEL KEYS OR DIGITS.

-TO EXECUTE ITEM, PRESS ON/OFF, POWER, OR ENTER.

56

206-4147

Page 56
Image 56
LG Electronics STB1000 manual To Execute ITEM, Press ON/OFF, POWER, or Enter

STB1000 specifications

The LG Electronics STB1000 is a state-of-the-art set-top box designed to enhance the viewing experience for home entertainment systems. Combining cutting-edge technology with user-friendly features, the STB1000 delivers a seamless multimedia experience. One of its standout attributes is 4K Ultra HD resolution support, offering stunning visuals with vivid colors and improved clarity. This makes it an ideal choice for anyone looking to enjoy their favorite shows, movies, or sports events in the highest quality possible.

In addition to 4K support, the STB1000 boasts HDR capabilities, which enable a greater range of brightness and contrast levels. This feature ensures that dark scenes retain detail while bright areas shine with brilliance. By utilizing HDR10 and Dolby Vision formats, LG Electronics ensures that users can experience content as it was intended by filmmakers.

The STB1000 is also equipped with advanced audio technologies, including Dolby Atmos support. This immersive sound technology creates a multi-dimensional audio experience, making it feel like the content is enveloping the viewer. Coupled with various surround sound formats, this set-top box elevates home theater setups, allowing users to enjoy cinema-quality sound from the comfort of their living rooms.

Connectivity is another highlight of the STB1000. It features multiple HDMI ports, USB connections, and Ethernet support, enabling users to easily connect a variety of devices, from gaming consoles to external storage. Additionally, built-in Wi-Fi ensures hassle-free streaming from popular platforms such as Netflix, Amazon Prime, and Hulu without the need for cumbersome wires.

The device comes with an intuitive user interface that makes navigation simple and provides quick access to favorite apps and channels. Voice control functionality adds convenience, allowing users to search for content or control playback with simple voice commands.

Moreover, the STB1000 supports popular streaming protocols, making it compatible with a wide range of smart devices. This flexibility allows users to access content across multiple platforms, enhancing the overall entertainment ecosystem.

Overall, the LG Electronics STB1000 combines advanced display and audio technologies with practical features, delivering an exceptional home entertainment experience. Whether it's movie nights, binge-watching series, or enjoying video games, the STB1000 is equipped to meet diverse multimedia needs, making it a valuable addition to any home entertainment setup.