Troubleshooting (Cont.)

Clone Programmer Troubleshooting

Warning: Do not connect a clone programmer to the STB1000 MPI/GAME CONTROL port while the STB is in LodgeNet PPV Mode, as this will damage the clone programmer.

Reset Clone Programmer After Static Shock

After replacing exhausted batteries (LT2002 only), or if the clone programmer behaves strangely after a static shock:

•TLL-1100A: Turn the TLL-1100A OFF and then ON.

•LT2002: Use a paper clip or similar instrument inserted through the small hole marked RESET to activate the internal reset switch and restore normal operation.

After a reset, check the real-time clock setting. It may be necessary to reset the clone programmer clock from an STB containing the correct time.

Note: For both Master and Target STB1000s—The STB EBL must be in Pass-through Mode.

Symptom

Possible Cause(s)

Possible Solution(s)

Clone Programmer

 

 

Clone copies setup in less

Not enough time to copy entire

TLL-1100A: Turn the TLL-1100A OFF and then ON.

than 30 seconds.

STB setup.

LT2002: Press RESET on clone programmer.

 

 

Then redo Learn/Teach. (Learning usually takes about 90 seconds;

 

 

Teaching usually takes 3 to 4 minutes.)

 

 

 

Remote does not operate

Wrong Installer Remote.

Only use an LG Installer Remote to operate clone programmer

clone programmer.

 

with STB.

 

 

 

Clone menu does not

MPI cord not connected.

Connect MPI cord properly, and ensure good connection.

appear on display panel

STB/display not turned ON.

STB/display must be powered ON for clone programmer to work.

screen, TLL-1100A shows

(LT2002 only) Weak batteries.

Install four (4) fresh AA high-quality alkaline batteries.

error message, or LT2002

LED does not blink.

(TLL-1100A only) No charge.

Ensure the TLL-1100A is fully charged or connected to AC power.

 

 

 

Clone menu hard to read.

Weak signal.

Connect STB to a reliable analog channel signal source.

 

 

 

No time set.

Time not available.

Set time on an STB, and copy time to clone programmer.

 

 

 

Clone not working.

Clone programmer problem.

Try a different clone programmer.

 

 

 

 

 

Reset the clone programmer.

 

 

 

Clone scans channels

Clone should only scan channels

Ensure STB is set up correctly, and try cloning again.

more than once.

once.

 

Master and Target STBs

 

 

Cloning did not work.

Procedure interrupted.

Wait until procedure complete message is displayed.

 

 

 

 

Different STB models.

Cloning is only possible with identical model STBs.

 

Step(s) omitted or not performed.

Refer to the applicable cloning procedure(s), and make sure all

 

 

tasks were performed.

 

 

 

(LT2002 only) Clone time

Batteries were removed.

Batteries must remain installed to retain time settings.

disappeared.

 

 

 

 

 

New setup not present.

Target STB not reset.

Disconnect Target STB from AC power for 15 seconds.

•After cloning operations are complete, unplug the TLL-1100A/LT2002 from the STB.

•If the display panel does not show a picture on the (blank) screen after a few seconds, just change channels.

82

206-4147

Page 81 Page 83
Page 82
Image 82
LG Electronics STB1000 manual Clone Programmer Troubleshooting, Symptom Possible Causes Possible Solutions Clone Programmer
Page 81 Page 83

STB1000 specifications

The LG Electronics STB1000 is a state-of-the-art set-top box designed to enhance the viewing experience for home entertainment systems. Combining cutting-edge technology with user-friendly features, the STB1000 delivers a seamless multimedia experience. One of its standout attributes is 4K Ultra HD resolution support, offering stunning visuals with vivid colors and improved clarity. This makes it an ideal choice for anyone looking to enjoy their favorite shows, movies, or sports events in the highest quality possible.

In addition to 4K support, the STB1000 boasts HDR capabilities, which enable a greater range of brightness and contrast levels. This feature ensures that dark scenes retain detail while bright areas shine with brilliance. By utilizing HDR10 and Dolby Vision formats, LG Electronics ensures that users can experience content as it was intended by filmmakers.

The STB1000 is also equipped with advanced audio technologies, including Dolby Atmos support. This immersive sound technology creates a multi-dimensional audio experience, making it feel like the content is enveloping the viewer. Coupled with various surround sound formats, this set-top box elevates home theater setups, allowing users to enjoy cinema-quality sound from the comfort of their living rooms.

Connectivity is another highlight of the STB1000. It features multiple HDMI ports, USB connections, and Ethernet support, enabling users to easily connect a variety of devices, from gaming consoles to external storage. Additionally, built-in Wi-Fi ensures hassle-free streaming from popular platforms such as Netflix, Amazon Prime, and Hulu without the need for cumbersome wires.

The device comes with an intuitive user interface that makes navigation simple and provides quick access to favorite apps and channels. Voice control functionality adds convenience, allowing users to search for content or control playback with simple voice commands.

Moreover, the STB1000 supports popular streaming protocols, making it compatible with a wide range of smart devices. This flexibility allows users to access content across multiple platforms, enhancing the overall entertainment ecosystem.

Overall, the LG Electronics STB1000 combines advanced display and audio technologies with practical features, delivering an exceptional home entertainment experience. Whether it's movie nights, binge-watching series, or enjoying video games, the STB1000 is equipped to meet diverse multimedia needs, making it a valuable addition to any home entertainment setup.
Top Page Image Contents