LG Electronics STB1000 manual View Digital Signal Strength, Manual Tuning

Channel Setup Options (Cont.)

Manual Tuning (Add/Delete Channels) / View Digital Signal Strength

Manual Tuning (Add/Delete Channels)

Use this option to manually add active channels or remove unwanted channels. See also “Edit Channels” on the following page.

1.Press MENU on the Installer Remote, and use the arrow navigation keys to select/highlight the CHANNEL menu option. Then, press ENTER.

2.Use the Up/Down arrows to select Manual Tuning, and then press ENTER.

3.In the Manual Tuning pop-up window, use the Left/Right arrows to select DIGITAL or ANALOG. Then, use the Up/ Down arrows to highlight the Channel field.

4.In the Channel field, use the Left/Right arrows to select the required channel. Then, use the Up/Down arrows to select Add or Delete (if the channel is not currently active, there will be an “Add” button; otherwise, there will be a “Delete” button as shown in the example at right).

5.Repeat steps 3 and 4 to add/delete additional channels.

6.When you are done adding/deleting channels, select Close and press ENTER to close the pop-up window and return to the Channel Menu.

7.Press MENU to return to TV viewing, or press RETURN to return to the previous menu level.

View Digital Signal Strength

The Manual Tuning option described above enables you to view the signal strength for digital inputs. Select the desired digital channel in the Manual Tuning pop-up window to view the quality of the digital signal being received.

CHANNEL		Move	Enter
Auto Tuning
Manual Tuning
Channel Edit	►
Channel Label		DIGITAL	►
	Select channel type and
	RF channel number.
	Channel		2
	DIGITAL 2-1
	Bad	Normal	Good
		Delete
		Close

Notes:

•A password is required to gain access to Manual Tuning if the Lock System is turned ON.

•If you are/will be setting up this STB1000 as a Master STB, complete any manual channel tuning/ editing BEFORE transferring the STB setup to the internal STB controller (PTC). Refer to the Commer- cial Mode Setup procedure on pages 40 to 41 for further information.

•If you delete a found channel, it isn’t gone forever. Simply re-add the channel to the channel lineup as described in the “Edit Channels” procedure on the following page.

206-4147 17