31
Basic Funct ions
30
Power Save Mode
When the phone is in an area without service for about
15 minutes, it stops searching for service and enters
into Power Save Mode. When your phone activates
this feature, Power Save is displayed on the screen.
The phone automatically checks for service periodically
or you can check manually by pressing any key.
Signal Strength
The call quality depends on the signal strength in your
area. The current signal strength is displayed on the
screen as the number of bars next to the signal
strength icon: The more bars, the better the signal
strength. If the signal quality is poor, move to an open
area. If you are in a building, the reception may be
better near a window. For maximum reception, make
sure that the antenna is fully extended.
Redialing Calls
1. Press to redial the last number in call history.
You can also redial any of the last 30 numbers
you have dialed. The last 30 numbers are
stored in the call history list. (See the Call
History List on page 71.)
Adjusting the Volume
The volume keys on the left side (Side Keys) of the
phone can be used to adjust the earpiece, ringer,
and key beep volumes. The upper key is used to
increase and the lower key is used to decrease the
volume.
You may adjust the earpiece volume during a call.
The ringer volume can be adjusted through the
Menu feature.
If you adjust the ringer volume to minimum or set
the lamp in ringer type, the LCD displays
-Ringer
Off- and you will not hear the ringer sound.
The key beep volume is adjusted through Menu
feature.