Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off.
Connecting the stand
1. Place the monitor with its front facing downward on a soft cloth.
2. Assemble the Stand Body into the product in the correct direction as shown in the picture.
Stand Body |
| Hinge Body |
|
|
|
3. Assemble the Stand Base (Front, Rear) into the Stand Body in the correct direction then tighten the screw as shown in the picture.
Stand Base | Stand Body | |
| ||
|
| Stand Base |
4. Insert the Cable Deco Cover in the Stand Body in the correct direction.
Stand Base | Cable Deco Cover |
Stand BodyCable Deco Cover |
5. Once assembled take the monitor up carefully and face the front side
Important
This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture.
Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot.
A3
