LG Electronics W2452V Using the Computer, Connecting the Display, Connect DVI Cable, AV equipment

Connecting the Display

Using the Computer

1. Make sure to turn off the computer and product. Connect the cable as below sketch map form 1 to 2 .

A	Connect DVI Cable	NOTE
		This is a simplified representation of the rear view.
B	Connect Dsub Cable (PC)	This rear view represents a general model; your display may differ from the view as
		shown.
C	Connect Dsub Cable (Mac)	User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with
D	Connect HDMI Cable	ferrite cores to maintain standard compliance for the product.
			Power Cord	Signal Cable

Headphone/Earphone Input

Wall-outlet type
Fix the power cord & signal cable
as shown in the picture.	AV equipment
PC-outlet type
	(Set-Top Box, DVD, Video,
	Video Game Console)
DVI-D(This feature is not available in all countries.)
	Mac adapter
	For Apple Macintosh use, a separate plug adapter is needed to
	change the 15 pin high density (3 row) D-sub VGA connector on
	the supplied cable to a 15 pin 2 row connector.

2. Insert the Cable Deco Cover in the Stand Body in the correct direction.

3. Press button on the front switch panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically.

(Only RGB Mode)

NOTE

‘Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. ‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution.

A6