LG Electronics XBR446 owner manual Connections Connecting to a TV

Connections (Continued)

Connecting to a TV

Make one of the following connections, depending on the capabilities of your existing equipment.

RF coaxial connection

Connect the RF.OUT jack on the VCR/DVD Recorder to the antenna in jack on the TV using the 75-ohm Coaxial Cable supplied (R).

ote

If you use this connection, tune the TV to the VCR/DVD Recorder’s RF output channel (CH 3 or 4).

How to set the VCR/DVD Recorder’s RF output channel

When the VCR/DVD Recorder is turned off, press and hold CH (v/V) on the front panel for about five seconds to change the RF output channel (CH 03 or CH 04). “RF-03” or “RF-04” appears in the display win- dow.

Audio/Video connection

1Recorder to the video in jack on the TV using the video cable (V).Connect the VIDEO OUT jack on the VCR/DVD

Connect the Left and Right AUDIO OUT jacks						from
2 the VCR/DVD Recorder to the audio left/right in
jacks from the TV using the audio cables (A).
Rear of TV
ANTENNA	S-VIDEO	VIDEO	AUDIO INPUT	COMPONENT/PROGRESSIVE VIDEO INPUT
INPUT	INPUT	INPUT
			L R	Pr	Pb	Y

R S V A C

Rear of VCR/DVD Recorder

S-Video connection

1Recorder to the S-Video in jack on the TV using the S-Video cable (S).Connect the S-VIDEO OUT jack on the VCR/DVD

2 Connect the Left and Right AUDIO OUT jacks from the VCR/DVD Recorder to the audio left/right in jacks on the TV using the audio cables (A).

Component Video (Color Stream®) connection

1VIDEO OUT jacks on the VCR/DVD Recorder to

the corresponding in jacks on the TV using an Y Pb Pr cable (C).Connect the COMPONENT/PROGRESSIVE SCAN

2 Connect the Left and Right AUDIO OUT jacks from the VCR/DVD Recorder to the audio left/right in jacks on the TV using the audio cables (A).

Progressive Scan (ColorStream® pro) connection

If your television is a high-definition or “digital ready” television, you may take advantage of the VCR/DVD Recorder’s progressive scan output for the highest video resolution possible.

If your TV does not accept the Progressive Scan for- mat, the picture will appear scrambled if you try Progressive Scan on the VCR/DVD Recorder.

1VIDEO OUT jacks on the VCR/DVD Recorder to

the corresponding in jacks on the TV using an optional Y Pb Pr cable (C).Connect the COMPONENT/PROGRESSIVE SCAN

2 Connect the Left and Right AUDIO OUT jacks from the VCR/DVD Recorder to the audio left/right in jacks on the TV using the supplied audio cables

(A).

otes

Set Progressive Scan option to “ON” in the General menu, see page 22.

Progressive Scan does not work with the RF, Audio/Video or S-Video connections.

DVR HOOKUP

17