TROUBLESHOOTING
Problem | Cause | Solution |
|
|
|
MAINS lamp (orange) not | Mains not present. | Call qualified service personnel to restore |
illuminated. |
| power to socket. |
|
|
|
| 2U POD input cord not | Refer to 2U POD installation instructions in |
| connected to mains. | this manual: |
|
| • Installation on GXT 2U UPS and |
|
| • Rack Mount Installation. |
|
|
|
UPS Available lamp (green) not | UPS output power not | Turn on UPS. Refer to UPS user manual. |
illuminated. | present. |
|
|
|
|
| UPS input and/or output cord | Refer to 2U POD installation instructions in |
| not connected to 2U POD. | this manual: |
|
| • Installation on GXT 2U UPS and |
|
| • Rack Mount Installation. |
|
|
|
2U POD will not start some / all | 2U POD output circuit | Reset 2U POD circuit protectors. |
connected loads. | breaker has tripped. |
|
|
|
|
2U POD circuit protectors trip | Overcurrent on 2U POD | Recalculate load requirements, distribute |
after resetting. | socket. | load among other 2U POD sockets. |
|
|
|
10
