IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS.
This manual contains important instructions that should be closely followed dur-
ing installation and maintenance of this product.
This product is designed for Commercial/Industrial use only. It is not intended
for use with life support and other U. S. FDA designated “critical” devices. Max-
imum load must not exceed that shown on the rating label. See Limited Warranty.
WARNING: Lethal voltages may be present within this unit even when it is
apparently not operating. Observe all cautions and warnings in this manual.
Failure to do so MAY result in serious injury.
This equipment or Micro SmartSwitch is designed for use on a properly
grounded (earthed), 208/240 VAC, 50Hz or 60Hz supply.
ELECTROMAGNETIC COMPATIBILITY- The Micro SmartSwitch complies
with the limits for a CLASS B digital device, pursuant to part 15 of FCC rules.
These limits provide reasonable protection against harmful interference. If this
device is not installed and used in accordance with the instruction manual, it may
cause harmful interference to radio communications. Not operating this device in
accordance with these instructions may cause harmful interference, which the
user must correct at their own expense.
Operate the Micro SmartSwitch in an indoorenvironment only in an ambient
temperature range of 0°C to 50°C (32°F to +122°F). Install it in a clean environ-
ment, free from conductive contaminates, moisture, flammable liquids, gasses, or
corrosive substances.
Turn the Micro SmartSwitch off and isolate it from other equipment before
cleaning. Use a soft cloth, never liquid or aerosol cleaners.
Keep the vents free from dust accumulation that could restrict airflow.
Never block or insert any object into the ventilation holes or other openings.
DISCONTINUED
PROD U C T