Liebert PSI XR user manual Rack-Mount UPS Conversion and Installation

Installation

3.3Rack-Mount UPS Conversion and Installation

See Figure 8 when installing the Liebert PSI XR in a rack. External battery cabinets are installed in same manner.

Figure 8 Convert the Liebert PSI XR for rack installation

Step 1 Step 2

Step 3

Step 4

Step 5

! WARNING

Placing heavy equipment near the top of a rack may increase the risk of tipping. Place the UPS, and battery cabinet if one is being used, in the bottom of the rack.

! CAUTION

Lifting equipment into rack may be a two-person job, depending on weight of equipment.

NOTICE

When rack-mounted, the UPS must be supported by a shelf, slide rails, brackets or fixed rails on each side. The rack-mount handles WILL NOT support the weight of the UPS. They are used to move the UPS into and out of the rack.

9